8
During all channel scan if “scan” key is pressed again, scanning will stop on
indicated channel. “Scan” indication will disappear from liquid crystal display. If
the transceiver hears a signal the scanning function will cease and the receiver
will stay on that channel for four (4) seconds minimum or as long as the signal
continues. During this stop scan period, the scanning function can be
suspended by pressing the “scan” key again. The scan indication will flash
continuously. Press scan key once again to reactivate scanning.
Press normal key to terminate scanning. The normal channel is recovered from
memory and shown on the liquid crystal display.
When the all channel “scan” mode is selected, the squelch control should be
adjusted fully clockwise (instead of just past first silent position). This will avoid
the scan function stopping on a channel where interference or a week and
unintelligible signal may exist.
D.
Channel 16
Press key “16” to immediately access. Channel 16 will be indicated on LCD.
Dual, Tri, All Scan and Weather Channel functions will be cancelled. Press
normal key to terminate Channel 16 function and return to normal channel.
E.
Weather Channels
Press “WX” key to access weather channel mode. WOX is indicated on LCD.
When first turned on the weather channel is 01.
Press “up” or “down” key to select the desired weather channel. Total 10
weather channel (from 00 to 99) are available.
Press “normal” key to terminate the weather channel function and return back
to normal channel function.
F.
M Channels Mode
Press “M” key to activate M channel function. “M” indicator is shown. Channel
number show “00.”
Press “M” key again to access next M channel. Channel number shows “01.
Press “M” key again will access M2 channel and then cycle back to M0.
Press “normal” button to exit from M channel mode. NOTE: Dual Watch and Tri
Watch functions can be can be used in M channels mode.
G.
Dual Watch Mode
Press normal key and select any channel you may wish to scan, with Channel
16, in the dual watch mode. Press Dual Watch. Dual will be indicated on the
LCD. Dual Watch can only be selected when transceiver is in normal mode.
When hearing a signal on either channel, Dual Watch will be suspended for a
minimum of 5 seconds or as long as the received signal continues.
Press Dual key again or normal key to terminate Dual function.
H.
Tri Watch Mode
Press normal key and select one channel to be Tri watched (scanned). Press,
and hold for 1.5 seconds, program key and select one more channel to be Tri
watched (scanned). Press normal and then press Tri. Tri will be indicated on
LCD. The two channel selected above will be Tri watched (Scanned) together
with Channel 16.
When hearing a signal on any of these three (3) channels, the Tri watch
scanning will be suspended for a minimum of 5 seconds or as long as the
