2
1
th
. Installation Notes
For your safety and equipment security, please be sure
reading the safety instructions carefully before using the
machine.
If you have doubts in the use, please read this manual first.
Described in detail in the body of the device operation. If you
still have questions, please contact us, we will give you a
satisfactory answer as soon as possible.
Specifications subject to release to change without notice,
please understand.
When installing, please note the following:
1, power supply:
Please use with protection to single-phase three-wire AC
100-240V power supply, and ensure that the entire engineering
system using the same protected. You can not use unprotected
power, the power cord ground pin can not be destroyed.
2, Power:
When you need to move equipment or other work must outage,
to shut off all power, including the power switch, unplug the
power plug, so as to ensure the safety of your equipment.
3, Cable:
The items can not put pressure on the power supply lines,
signal lines, communication lines, cable should keep from
trample or extrusion, to prevent the risk of leakage or short
circuit.
4, Signal cable:
Inserting or pulling the signal line to the device, the device
needs outage, so as not to damage the device. Hot plug caused
damage not covered under warranty.
