11
3,setting the signal source:
Press the MENU key so display unit pop-up the main menu as
shown in Figure 1, press the right navigation key then pop up
sub-menu as shown in Figure 2, by the left and right navigation
keys to select the input signal, the input signal contain HDMI,
VGA and VIDEO ,after finishing selecting access the type of
signal source of per channel ,press MENU key to save and exit
to complete the setup.the screen can display 4 images under 4
split mode. The input signal is VGA, the screen may show the
offset, color cast and display incomplete for the first time
access, , but can be corrected by remote control AUTO key.
Note: The menu operation mode and other settings are the same
way as the signal source, not reproduced here!
figure 1
figure 2
4, Output resolution:
The factory setting output resolution is 1920 * 1080 of device,
if the display unit less than 1920 x 1080 resolution and can
not display properly, you can reduce the resolution by the
output resolution menu causing the display unit to display
properly, the device output resolution can be optional of 1920
* 1080,1024 * 768,1280 * 1024,1280 * 720.
5, System ID:
Reservation function, need not to be provided;
6, System Language:
Can be set to Chinese or English;
