LINET Eleganza 3XC Скачать руководство пользователя

Страница: 10 / 56

If this equipment is modified, appropriate inspection and testing must be
conducted to ensure continued safe use of the equipment.

An additional multiple socket-outlet or extension cord shall not be connected
to the medical electrical system.

2.1

Safety Instructions



Follow the instructions carefully.



Only use the bed if it is in perfect working order.
If necessary, check the bed functions daily or at each shift change.



Use the bed with the correct mains supply only.



Ensure that the bed is operated by qualified personnel only.



Ensure that the patient (health permitting) has been informed about the operation of the bed and all
applicable safety instructions.

Incompatible mattresses can create hazards.

WARNING!

Do not modify this equipment without authorization of the manufacturer.

WARNING!

No modification of this equipment is allowed!

WARNING!

During specific investigations or treatments the significant risks of reciprocal
interference posed by medical electrical equipment may occur.

WARNING!

To avoid the risk of electric shock, this equipment must only be connected to
a supply mains with protective earth.

WARNING!

Содержание Eleganza 3XC

























































Результаты поиска

Содержание Eleganza 3XC

Отзывы:

Похожие инструкции для Eleganza 3XC

Бренды по названию

Популярные бренды

LINET Eleganza 3XC, Руководство пользователя и техническое описание

Результаты поиска

Содержание Eleganza 3XC

Отзывы:

Похожие инструкции для Eleganza 3XC

Бренды по названию

Популярные бренды