manualshive.com logo in svg

LINET D9U001F10-0101, Инструкция по использованию и техническое описание, Страница: 39 / 46

Поделиться
Скачать
LINET D9U001F10-0101 Скачать руководство пользователя страница 39

D9U001F10-0101_06

           

           39

Fig. Extender installation

Extender installation: 

► 

Place the Extender® (without securing screws) on the upper edge of the siderail (

1

)

► 

Sid rails must be folded up in highest position. Square hole of Extender is pointed on the mattress support platform.

► 

Insert screws from the inside of the bed thru the square holes of the Extender.

► 

Secure the screws with plastic rosette nuts and tighten (

2

). Nuts are facing out the bed.

► 

Check the Extender is secured properly by pushing it sideways.

16.5 Extender – for Single Collapsible Siderails

WARNING!

Risk of injury or collision due to incorrect use!

► 

Extender can be used only with single collapsible siderails. Manufacturer will held no responsibility due using the  

 

 

Extender with different types of siderails.

► 

Movement of the bed must be considered if the Extender is installed.

 

     ►  Use of the Extender in other manners than described in the instructions for use is on the responsibility of hospital  

 

 

personnel. Manufacturer will held no responsibility for incorrect use.

Extender is adapte for siderails. It is recommended to use Extender when placing higher mattress on the bed than recommended 

by manufacturer. Extender will raise the height of siderails and also safety of the patient during sleep time. Extender is designed for 

single collapsible siderails only.

Содержание D9U001F10-0101















































Отзывы:

Нет отзывов