LINET D9U001F10-0101 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 46

LINET D9U001F10-0101 Скачать руководство пользователя страница 11

D9U001F10-0101_06

11

WARNING!

Length adjustment of the bed must be proportional to the height of patient!

WARNING!

Risk of trapping or squeezing because of patient´s body constitution disproportionate to the size of mattress

support platform!

WARNING!

Only use accessories approved by manufacturer!

Injuries may occur in case of usage of other than approved accessories!

WARNING!

Any serious incident that has occurred in relation to the device should be reported to the manufacturer and the

competent authority of the Member State in which the user and/or patient is established!

WARNING!

This medical device is not intended for oxygen enriched environment!

WARNING!

This medical device is not intended for use with flammable substances!

WARNING!

This medical device is not portable medical electrical equipment!

WARNING!

Patient is allowed to use selected control elements only if hospital personnel had assessed that the patient´s

physical and psychological state is in accordance with use of them and only if the hospital personnel had

trained the patient in accordance with the instructions for use!

WARNING!

Make sure the duty cycle (2 min ON/18 min OFF) is not exceeded during bed positioning!

«
...
9
10
11
12
13
...
»

Содержание D9U001F10-0101















































Отзывы:

Нет отзывов