Linergy Spy Center Basic SCB010, Руководство по эксплуатации

Страница: 17 / 32

14
START CPS with electricity mains present (Line mode / AC mode).
1) After making sure that all connections are made correctly place the first 'switch' s entry into the
ON position. At this point the cooling fans start and the CPS lights up in standby mode.
2) To activate the CPS mode, hold down the ON / OFF button continuously for more than one
second.
3) When the CPS is turned on, the control unit initiates a self-diagnosis, which controls the charging
of the batteries and turn on the battery level scale indicating the charging status. After a few seconds,
it turns on the signaling symbol INVERTER LED ACTIVE: in this mode the machine continues to
function, and in case there was a 'power outage, the PSC works in battery mode without interrupting
the mains supply to the load connected output all 'SA output (output 1) while the' IF output (output 2)
turns on.
START CPS without main power grid (in Battery mode / battery mode).
1) Hold down continuously for more than one second the power button to turn on the machine. Make sure the 'safety
switch of the battery is ON.
2) In this mode, the PSC operates as if it were connected to the grid except for the fact that the AC input LED is turned off
and the symbol signaling Battery mode is switched on instead.
OFF CPS supplied without mains.
To turn off the CPS must be completely put in the OFF position 'of the mains switch located
behind the machine.
After this hold for more than one second the power button. In this way, power will be interrupted at
'output as soon as the display appears completely off.
Caution is advised to switch off all loads connected to the CPS before turning it off both in battery mode in which
electric network mode present.