34
9-3. How to apply the factory setting
To apply the factory setting into SI60/65/60F, download the configuration file from
the utility CD([ /LINEEYE/SetupRecord ]).Apply the downloaded file when selecting
the setup record file.
Version
SI-60
SI-65
SI-60F
Ver6.9.0.2 SI_60V6902_xxxxxx.
rec
SI_65_V6902_xxxxxx.
rec
SI_60F_V6902_xxxxxx.
rec
Use deviceInstaller or [ SILANIOinit ](configuration tool) to apply the factory
settings into SI60/65/60F.
Operation of [ SILANIOinit ](configuration tool)
1. Copy "SILANIOinit.exe" from the "/LINEEYE/SILANIOinitXXX" folder (XXX
would be the version of SILANIOinit.) in the utility CD to the appropriate folder
(For example, "c:/setup/").
2. Set your device in the same network segment as your PC.(If your devices are not in
the same network segment, you may not able to set.)
3. To execute the program, double click on "SILANIOinit" and click "search" to
display all XPort/WiPort embedded
Select your target device. Make sure you select the correct hardware (MAC)
address.
The contents will be
"Hardware (MAC) address -
IP address - type - version".
"xxxxx.rec" files will be
displayed in the [setup
record file]. Select the
proper file.
4. Click [save setup record] and the configuration will be saved.
To use this application, refer to the “SILANIOinit.txt” in the CD-ROM.
