LT360 Precision Turntable
User Manual
LT360 Precision Turntable
User Manual
11
1.1 LT360 Safety
The LT360 turntable should always be operated with care and
safety. Anything attached to the turntable will be in motion,
and can cause other objects or people to fall or be hit by
structures connected to the LT360.
Always make sure other people and objects are a safe distance
away from the area where the turntable is operating.
78
■
Calibration
Clicking this button will open the Calibration dialog as shown
below. Calibration is performed originally at the factory, and in most cases
will be permanent and not be required again. However if your application
requires recalibration for NIST compliance, you will probably need to send
in your unit to the factory for recalibration on a periodic basis. Calibration is
possible by other labs, but only if the required equipment and systems are
available.
