1
2
Getting Started
1. GETTING STARTED
The system comes with the following
components:
•
1 x Camera
•
1 x Mounting Screw Kit
•
1 x Allen Key
•
1 x RJ45 Coupler
•
1 x BNC Test Cable
•
1 x Mounting Template
•
1 x Quick Start Guide
•
1 x Instruction Manual
•
1 x Software/Documentation CD
Mounting Screw Kit:
•
3 x 2.8in / 70mm screws
•
3 x 1.2in / 30mm screws
•
3 x 1.6in / 40mm anchors
Allen Key
RJ45 Coupler
BNC Test Cable
1.1 Default Camera Username, Password, and Ports
Username:
admin
Password:
admin
Ports:
80
(HTTP),
30001
(Control/Streaming),
8080
(RTMP),
554
(RTSP)
IP Address:
DHCP Enabled by Default
(Router will automatically assign IP
address)
NOTE:
Once you have completed the basic setup of the camera, it is
recommended to configure a static IP address. This will prevent the camera
IP address changing in the event of a power failure. For details, see
“6.7.1
Local
Network”
on page 26.
Getting Started
1.2 Camera Interior Overview
Front of Camera
Rear of Camera
BNC analog
output
Reset button
Termination cables
