background image

2

Contents

Introduction

The Model AE-100 Commercial Telephone Entry System is designed 
for use as an access control device for small apartments or gated 
communities with up to 125 residents. The system can be used in a 
lobby or outside. Surface, recessed, and pedestal mounting options 
are supported. The system utilizes hands-free, full duplex telephone 
communications between visitors and residents for granting access.
Housed in a locked, rugged stainless steel faced enclosure, the AE-100 
features a lighted 12-key telephone style keypad and four operation 
buttons all with bright, easy-to-see graphics. The backlit two-line directory 
LCD display scrolls a programmable welcome message and shows the 
directory Names and Directory Codes. The system contains a built-in 
microphone, tamper resistant speaker, and a TTY connector for the 
hearing impaired.
The heavy duty access relay can control electric door strikes, magnetic 
locks, door & gate operators, or barrier gates.
Multi-lingual display programming prompts and voice help is available with 
a choice of English, Spanish, French-Canadian, or Portuguese language 
selection for the system. The system can be programmed locally using 
the keypad, or remotely with a touch tone telephone.

Instruction manuals and other support documents in Spanish, 
French-Canadian, and Portuguese are available on the
Linear Web site’s AE-100 product page at www.linearcorp.com.

Optional features that the AE-100 supports are provisions for postal lock 
and color CCTV camera installation.
The AE-100 is powered from a 16 VAC plug-in transformer and supports 
an internal rechargeable 1.2 amp/hour backup battery (not included). The 
battery charging circuit will support an external backup battery with up to 
7 amp/hour capacity.

Before starting the installation, please read and understand these 
instructions. Become familiar with the illustrations and wiring 
diagrams. They will be a guide to installing the system in an effi cient 
and professional manner.

Hardware Features

2-LINE, 16-CHARACTER-PER-LINE LCD DISPLAY

 

LED backlit display with easy-to-read .3” high characters

HEAVY DUTY FORM “C” (N.O. & N.C.) ACCESS RELAY

 

Relay has 10-amp AC & 7-amp DC @ 30 Volts rating

POSTAL SWITCH OPTION

 

Cabinet supports mounting a standard U.S.P.S. postal switch for 
mail carrier access

BUILT-IN ANNUNCIATOR

 

Programmable for beeps during access and chirps during keystrokes

SMART BACKUP BATTERY CHARGING CIRCUIT

 

Automatic load shed disconnects the backup battery if battery 
voltage drops too low

TTY JACK

 

Front panel connection for TTY text communications device for 
the hearing impaired

OPTIONAL COLOR CCTV CAMERA

 

System supports a Model CCM-1 color CCD camera for viewing 
the visitor area

FLEXIBLE TELEPHONE LINE CONNECTION

 

Telephone line can connect to on-board RJ-11 jack or terminal 
block

REMOVABLE TERMINAL BLOCKS

 

All terminal blocks are removable for quick servicing

TRIM RING FOR RECESS MOUNTING

 

System can be mounted recessed using the optional Model 
TR-100 trim ring

Software Highlights

AUTOMATIC DUAL PROGRAMMING METHODS

 

The system automatically recognizes two methods 
of programming to aid installers already familiar with 
programming other manufacturer’s access control systems

LOCALLY PROGRAMMABLE

 

All programming can be performed from the unit’s keypad

REMOTE TELEPHONE PROGRAMMING

 

Most programming can be performed with a TouchTone™ 
telephone over the phone line

125 RESIDENT DIRECTORY CAPACITY

 

Up to 125 residents can have a directory listing

125 STAND-ALONE ENTRY CODES

 

Up to 125 Stand-alone Entry Codes without a Directory Entry 
can be used for gaining access (Each Stand-alone Entry Code 
used reduces the number of available resident Directory Entries 
by one).

4 DIGIT ENTRY CODE LENGTH

 

4-digit length for all Entry Codes

MANUAL ACCESS RELAY OPERATION

 

Access relay can be activated indefi nitely or for a set period of time

2-3 DIGIT DIRECTORY NUMBER LENGTH

 

Directory Number lengths can be customized for small or large 
installations

MULTIPLE UNIT SUPPORT

 

Up to four AE-100 units can be connected to the same 
telephone line and share programming data using system utility 
commands.

RESIDENT CALL-BACK SUPPORT

 

Residents can call the system to initiate 2-way communications 
with a visitor. (Single unit installations only.)

Introduction ............................................... 2
Hardware Features ................................... 2
Software Highlights ................................... 2
Feature Overview ..................................... 3
Operation .................................................. 3
Database Overview .................................. 3
Component Locations ............................... 4
Wiring Diagram ......................................... 5
Important Mounting Requirements ........... 6
Entry System Mounting ............................ 7
Entry System Mounting (Continued) ......... 8
Access Relay Wiring ................................. 9
Telephone Wiring ...................................... 9
Multiple Unit Telephone Wiring ............... 10
Power, Battery, & Ground Wiring ............ 11
Optional Postal Lock ............................... 12
Optional Color CCTV Camera ................ 12
Programming Reference & Factory 
Defaults .................................................. 13
Access to Programming ......................... 14
Programming from the Keypad (Standard 
Method) .................................................. 14

Programming Over the Telephone .......... 15
Multi-unit Installations ............................. 16
Changing the Master Password ............. 16
Resident Data Programming .................. 17
Stand-alone Entry Code Programming ... 18
System Options ...................................... 18
System Options (Continued) .................. 19
System Options (Continued) .................. 20
System Utility Commands ...................... 21
System Utility Commands (Continued) ... 22
Alternate Programming Section .............. 23
Alternate Programming Reference ......... 24
System Adjustments ............................... 32
System Diagnostics ................................ 32
AE-100 Operation ................................... 33
Specifi cations ......................................... 34
Dimension Drawing ................................ 34
Accessories ............................................ 34
Troubleshooting ...................................... 35
Linear Limited Warranty.......................... 35
FCC Notice ............................................. 35

Содержание ACCESS AE-100 Guide





































Отзывы: