3
dc1513bf
DEMO MANUAL DC1513B
OTHER BOARD CIRCUITRY
Device U1 is an EEPROM device that is used by the PScope
software to identify the board and apply the correct set-
tings for the data collection.
USING PSCOPE SOFTWARE
PScope, downloadable from Linear Technology’s website
http://www.linear.com/
, processes data from the DC890
data acquisition board and displays FFT and signal analysis
information on the computer screen.
The onboard EEPROM U1 should enable automatic board
detection and auto configuration of the software, but if the
user wishes to change the settings, they can easily do so.
From the configure menu in the toolbar, uncheck autode-
tect device. The default settings for DC1513 are shown
in Figure 2.
Figure 2. Entering the Correct Device Information for Your ADC.
Select the Correct Parameters for the DC1513. Under Normal
Conditions, PScope Should Automatically Recognize the Board
and Adjust the Software Settings Accordingly.
QUICK START PROCEDURE
