Linear Acoustic UPMAX ISC, Руководство пользователя

Страница: 19 / 36

Figure 5-1 - I/O menu
Routing a signal into the UPMAX ISC is a two-step process.
The first step is creating an input group from the available physical hardware inputs (5-2A). The second
step is routing the audio from these inputs into the upmixer input (5-2B).
Routing a signal to the output is a similar two-step process which starts with creating an output group from
the available physical hardware outputs (5-2D) and then routing the audio from upmixer output (5-2C)
to the physical outputs.
The Delete All Groups button (5-2E) provides a quick way to – you guessed it – delete all groups
simultaneously.
Figure 5-2 - Signal routing menu
Creating an Input Group
Click on your first audio input source (5-3A) to highlight it, then right-click and select “Create Input Group.”
You may enter a custom name for this source in the Label field (5-3F) and customize the color (5-3D) of
the graphical routing lines.
Multi-channel groups can be created by holding the “Shift” key while selecting sources (Shift + Click).
Creating groups using non-contiguous channels is accomplished by holding the “Ctl” key while selecting
sources (Ctl + Shift).
NOTE: The channel order must still follow the proper convention to be properly assigned. For
example, L/R, C/LFE, Ls/Rs, Lfh/Rfh, Lrs/Rrs if setting up a 5.1-channel input on SDI 1-6 with
height channels on SDI 13-16.