Linear Acoustic UPMAX ISC, Руководство пользователя

Страница: 13 / 36

Press OK to save the new IP information
If you suddenly notice you’ve entered some incorrect information and need to bail out and start over, use
the Right/Left buttons to highlight “Cancel” followed by “OK”
Pressing the Right button from the IP Configuration (Control) screen will bring you to the IP Configuration
(AES67) screen. The steps for configuring this port are identical to those above for the Control port.
Finally, pressing the Right/Left buttons will eventually return you to the Home Screen.
IP configuration screen
Locate Mode
When you enable the “Locate Mode” from the remote user interface, the unit’s front panel display will
repeatedly change color until Locate Mode has been cleared by pressing any key on the front panel or by
clicking again on the “Locate Mode” button on the remote user interface. Enabling Locate Mode affects only
the unit’s display and has no effect on the audio.
Special Function Key Presses
Performing a full Factory Reset and engaging the Hardware Relay Bypass are possible from the front panel
by pushing and holding a particular combination of buttons.
Factory Reset
To reset the unit to its factory defaults, simultaneously press and hold the Left, Up, and Right buttons for ten
seconds until a red countdown timer appears in the bottom left corner of the display.