AERO.2000 User Guide July 2016
L16/1/18039
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
Page 14
2.
Use Up/Down arrow keys to highlight System and press Right Arrow
3.
On System screen use Up/Down arrows to highlight Network Access and press Right
arrow.
4.
Use Up/Down arrows to highlight IP Configuration and press Right arrow.
5.
Use Up/Down arrows to highlight Use DHCP and the press Right arrow to remove check
mark. See Figure 5-3.
6.
Use Up/Down arrows to highlight IP and press Right arrow. The alpha numeric entry
appears. Use the Rotary to select the numeric keyboard [123] and press Right.
7.
Use the Rotary to select each numeral and decimal point in the IP address you want to
assign to the AERO.2000. Press Right after each entry until the IP address is entered.
8.
Use Rotary to highlight OK and press Right.
9.
To exit the alpha numeric entry window at any time, without saving changes, use Rotary
to highlight Abort and press Right arrow.
10.
Repeat the IP address setting process to enter the subnet mask, gateway, and DNS
addresses. You can also enter the location of the unit (a room or rack ID for instance).
11.
When all the entries are made use Up/Down arrows to highlight Apply and press Right
Arrow.
Figure 5-3
Left: IP address, remote port, and MAC address; Right: reconfiguring IP settings
