50
•
Appendix A: GenICam Commands
Linea CLHS Series Camera
Appendix A: GenICam
Commands
This appendix lists the available GenICam camera features. Access these features using the
CamExpert interface.
Parameters in gray are read only, either always or due to another parameter being disabled.
Parameters in black are user set in CamExpert or programmable via an imaging application.
Features listed in the description table but tagged as
Invisible
are typically reserved for Teledyne
DALSA Support or third party software usage, and not typically required by end user applications.
Additionally the Standard column will indicate which parameter is a member of the custom DALSA
Features Naming Convention (denoted by
DFNC
), versus the GenICam Standard Features Naming
Convention (SFNC not shown).
Camera Information Category
Camera information can be retrieved via a controlling application. Parameters such as camera
model, firmware version, etc. are read to uniquely identify the connected device. These features
are typically read-only. GenICam applications retrieve this information to identify the camera along
with its characteristics.
The Camera Information Category groups information specific to the individual camera. In this
category the numbers of features shown are identical whether the view is Beginner, Expert, or
Guru. Features listed in the description table but tagged as
Invisible
are usually for Teledyne
DALSA or third party software usage—not typically needed by end user applications.
Camera Information Feature Descriptions
The following table describes these parameters along with their view attribute.
