47
DO91304C - DO91305C - DO91306C
www.domo-elektro.be
EN
· Move the screw covers and the handle from one side of the upper door to the other. Then remove the
upper door and place it on a soft surface to avoid scratching it.
· Remove the middle hinge (3). Remove the lower door and place it on a soft surface to avoid scratching
it.
· Move the cover caps from one side to the other.
· Remove the lower hinge (4) and the left adjustable foot.
!
Attention: the inclination of the refrigerator must be less than 45° so that the compressor oil does not
enter the cooling circuit. If you do shut down the unit completely, wait 24 hours before turning it back on.
· Remove the hinge pin from the plate and turn it 180°. Remount the pin in the hinge so that it
protrudes upwards when the hinge is turned.
· Attach this hinge to the bottom of the appliance on the left-hand side and the adjustable foot on the
right. Refit the bottom door to the appliance.