30
DO1097SV
EN
CHARGING
· Connect the adaptor to the upright vacuum cleaner via the connection provided on
the appliance handle in order to charge the vacuum cleaner.
· The battery charge indicator indicates when the appliance has been fully charged.
The lights will blink and will illuminate in turn when the battery is charging. When
all the lights are on, the battery is fully charged.
· The machine cannot be started during charging.
·
Prior to first use, charge the machine for 8 hours in order to be able to utilize the full
capacity of the battery.
WALL MOUNT
Please follow below instructions to fix the wall mount:
1.
Drill 2 holes in the wall corresponding to the attachment points of the
wall mount.
2.
Insert the supplied plugs into the wall.
3.
Fix the wall mount using the supplied screws.
4.
To store the device, simply hang it on the wall mount.
USE
·
Press the on/off button to turn the appliance on. The battery indicator light is blue and
indicates the battery level. If the battery is almost empty, the indicator light will flash on and
off.
· Pressing the ECO button will decrease the suction power and extend the autonomy. This
way, you will be able to vacuum longer at a lower suction power. Press the ECO button again
to let the appliance vacuum at full power.
· The autonomy depends on the type of surface. It will work for less time on carpets than on a
hard surface.
· While vacuuming, warm air will come out of the motor compartment. This is normal.
·
When you switch on the machine, the rotating floor brush at the bottom of the floor nozzle will begin
to turn. This will cause the
dirt in the opening to be shifted and thereby vacuumed up.
·
The machine is equipped with a safety which will ensure that the machine shuts itself off if, for
example, objects which are too large are sucked up, or if fing
ers become tangled in the floor brush.
This is for personal safety and to protect the motor. To reverse the floor brush, press the on/off button
once more.
