Page | 5
OPERATION GUIDELINES &
INSTRUCTIONS
LINE2design, Inc. Battery Powered Wheelchair Stair Climber - Yellow
Item # 70019-Y-BAT
Please keep instructions for future reference. Store with the Stair Chair for reference and/or new users.
SETUP
Remove all packaging materials before use
NEVER modify the chair to fit in storage area/compartment
To Unfold the Battery Powered Wheelchair Stair Climber
1.
Stand behind the chair.
2.
Apply rear wheel brakes on both wheels.
3.
Unbuckle strap in front of chair.
4.
Push the backrest and seat out until they lock into
place.
5.
Lower footrest.
6.
Release operator handle bar (red) and pull up the
operator handle completely to the last locked position.
7.
Attach head support.
8.
Pull up on the seat to make sure that it is locked in the
unfolded position.
9.
If the chair does not fold then it is in the locked
position.
To Fold the Battery Powered Wheelchair Stair Climber
1.
Apply rear wheel brakes on both wheels.
2.
Fold up the footrest.
3.
Remove head support and place on seat.
4.
Fold down patient arm rest and rear locking hand
grips.
5.
Turn off power on control panel.
6.
Turn the key on battery to the OFF position.
7.
Use the track release bar to fold the track system.
8.
Use operator handle release bar to return the operator
handle to the lowest position.
9.
Tip the chair back.
10.
Stand at the side of the chair and pull up on the red
fold away bar.
11.
Fold the seat up to the backrest.
12.
Use safety restraint to secure chair in the folded
position (above front wheels).
