Page | 4
LINE2design, Inc.
1500 Crafton Avenue, Building 128
Mentone, CA 92359
909-798-1829
www.LINE2design.com www.LINE2EMS.com
In Case of Power Failure
: The handles in front
of the Battery Powered Wheelchair Stair
Climber extend for easy transportation. Push
down on red button to extend or retract.
Make sure the front handles are fully
extended and locked into place before use.
Handle Length: 14.25”
Rear Wheel Brakes
(Both wheels)
To apply brakes:
Push down on red lever.
To release brakes
:
Push down on grey lever.
Molded Locking Hand Grips
Locking handles lift up to
transport patient on flat surfaces.
Handles fold down for storage.
CLEANING AND STORING
Clean the Battery Powered Wheelchair Stair Climber with a clean cloth or soft brush and warm
soapy water.
Rinse with warm water and air dry completely.
Do NOT clean with products containing bleach or phenol.
A stiff bristled brush can be used if necessary.
Always clean the chair before storing.
Make sure the chair is completely dry before storing.
Make sure there are no rocks or debris in the track before storing.
Make sure the chair is NOT damaged and working properly before storing.
Store in a clean and dry area.
Do Not Lubricate the Track Stair Chair System or any other part of the track system.
Lubricants on the belts or track can cause the chair to perform unpredictably, resulting in injury to
the patient and/or operators.
If track or belts pick up oil or grease during use, clean the track and belts with a mild all-purpose
cleaner before using the chair again.
Always perform a complete inspection on the chair before storing; making sure the chair is free
from any defects.
After each use ensure the battery is adequately charged and ready for the next transport.
Always turn power OFF on control panel, and turn the key on power unit to the OFF position
before storing.
