Troubleshooting
9
3.3. On Screen Display Menu (OSD)
The On Screen Display menu provides a lot of information about the switch configuration and
the attached computers, and offers advanced administration and full KVM Switch control to the
user.
Activate the OSD by the hotkey sequence:
Scroll Lock + Scroll Lock + space bar
Main OSD Menu
Select computer/port: use
Up/Down Arrow
key to
navigate,
Page Up/Page Down
to scroll page, hit
Enter
to select.
Edit computer name: just hit
Insert
to edit and
Enter
to confirm.
F2: Save
- Save all modifications you have made.
When pressing F2, you will see the message--
"Saving parameters" for confirmation.
F1: Setup
- rotate through Main/ Video Setting/
Setup/ Status OSD menu pages
Setup OSD Menu
Auto logout
: specify the timeout before an auto-
logout (00~99 min, +1 min) is performed
OSD Timeout
: specify timeout for OSD menu
remaining on screen (00~99 sec, +5 sec)
AutoScan period
: Specify the delay time for auto
scan (00~99 sec, +5 sec)
Title bar
: Specify the title bar position
(Left/Right/Disable)
Hotkey
: specify the hotkey preceding sequence
(SCROLL LOCK, CAPS, F12 or NUM LOCK)
Password
: Enable/Disable password protection
Enable /Disable Remote Console
: Toggle the
remote console On/Off. If the remote console is in
OFF state, a message will remind you appearing
under the OSD title bar,
Remote control disabled
Always press F2 to save any changes!
Video setting Menu
Allows you to adjust video settings individually for
every port:
Gain:
specify level of gain. (00 ~ 50)
Equ:
specify level of equalization. (00 ~ 50)
Go to Main/Video setting, and then begin to adjust
the video parameters such as gain/equalization.
Start with equalization to adjust the sharpness and
shadows followed by gain for the brightness. It may
be necessary to try several different settings and
combinations to achieve the best display. Always
press F2 to save any changes!
Main OSD Menu
F1 Setup OSD Menu
Video Setting Main Menu
