User Manual
English
NOTE:
BUZZER function does not work on the 8x8 version
NOTE:
All commands are case sensitive and must be followed by a carriage return to be executed
*These commands are for C6 HDBaseT modules only
SINK = The connected receiver
SRC= Output port on the module
ALL= IR all on the CPU board
0/1= Off/On
RS-232 Protocols
Before attempting to use telnet control, ensure that both the matrix and the PC/Laptop are
connected using an active network.
To access the telnet control in Window
s 8, click on the ‘start’ menu and type ‘CMD’ and
press enter.
When using
Windows 7, click on the ‘start’ menu and type ‘CMD’ in the search field and
press enter.
When using Windows XP,
click on the ‘Start’ menu and click on ‘Run’, type ‘CMD’ and then
press enter.
When using a Mac, go to ‘Go’, ‘Applications’, ‘Utilities’ and choose ‘Terminal’.
Once in the command line interface type ‘telnet’, then type the IP address of the unit followed by a
space and 23, then hit enter.
NOTE:
The IP address of the Matrix can be displayed on the device’s LCM monitor by pressing the
‘Menu’ button twice.
Содержание 38258
Страница 2: ......
Страница 10: ...User Manual English RS 232 Telnet Command...
Страница 11: ...User Manual English...
Страница 15: ...User Manual English Connection Diagram Example shows the 8x8 version...