Lindy 38130, Руководство пользователя

Страница: 4 / 40

User Manual English
Overview & Operation
Front Panel
1. IR Window
Receives IR commands from the supplied IR Remote
2. Power
Turn the Switch On/Off
3. Menu

Press to launch the OSD menu

Press to make a menu selection in the OSD
4. -/+ Buttons
Use these buttons to move up and down in the OSD
5. Channel Input (1
– 4) Selection

Use the Channel Input buttons to cycle through the available Inputs for each Channel; use Input
Channel button 1 to control Channel 1, Input Channel button 2 to control Channel 2 and so on.
For example if you have selected Channel 1, by default this will display Input 1, by pressing
Channel Input button 1 the Input will switch to Input 2, further presses will move the Input to 3 to 4
and then back to 1.
6. Window Mode (A
– H)

Window A
– Only the Input selected under Channel 1 will be displayed.

Window B
– Only the Input selected under Channel 2 will be displayed.

Window C
– Only the Input selected under Channel 3 will be displayed.

Window D
– Only the Input selected under Channel 4 will be displayed.

Window E
– The Inputs selected under Channels 1 – 4 will be displayed in a 2 x 2 grid.

Window F
– The Input selected under Channel 4 will be displayed on the right half of the screen,
the Inputs selected for Channels 1
– 3 will be displayed in on the left half of the screen.

Window G
– The Input selected under Channel 1 will be displayed full screen, with the Inputs
selected under Channels 2
– 4 will show (Picture in Picture) across the bottom of the screen.

Window H
– the Inputs selected under Channels 1 – 4 will be displayed in a 4 x 1 grid.
POWER MENU
- +
CHANNEL
INPUT
1 2 3 4
G/ H/
WINDOW A/1
B/2 C/3 D/4 E/ F/
1 2 3
5
6
4