CPU Switch Smart SUN-MAC-PCInstallation and Use
Page 25
3)
A data file that tells the upgrade program (AVMP.EXE) which binary code files to
download to the CPU Switch Smart SUN-MAC-PC and where to put each file.
Theoretically this DAT file can be modified so that only certain processors are
upgraded but do not do this unless specifically instructed by LINDY technical
support.
e.g.
MP129SPU.DAT
Like the code files, the first two digits represent the product type (e.g. MP is CPU
Switch Smart SUN-MAC-PC). The next three digits represent the version number
(e.g. 129 equals firmware version 1.29). The last three digits are the model number
(e.g. SPU is the CPU Switch Smart SUN-MAC-PC supporting Sun, PC and USB
protocols).
To upgrade the CPU Switch Smart SUN-MAC-PC, check that the DAT file
designation matches the model that you have. In other words, if you have an CPU
Switch Smart SUN-MAC-PC and you want to upgrade to version 1.30 then the DAT
file that you need would be named MP130SPU.DAT. Also check that all the required
files are loaded into the same directory on your computer. From that directory run
the upgrade file using the following command line.
AVMP
{Dat_file_name}.
DAT
Where
{Dat_file_name}
is the name of the required DAT file
For example, if the name of the required DAT file is MP129SPU.DAT then use the
following command line:
AVMP MP129SPU.DAT
For your convenience the upgrade files will include a batch file that contains the
command shown above. To run the upgrade using the batch file, type the name of
the batch file e.g.
MP129SPU
Follow the instructions given on the screen to perform the upgrade. When the
upgrade is complete the program will confirm that the upgrade has been successful
and then quit.
