![Lindy 32251 and use Скачать руководство пользователя страница 26](http://html1.mh-extra.com/html/lindy/32251-and-use/32251-and-use_installation-and-use-manual_1920653026.webp)
CPU Switch Smart SUN-MAC-PCInstallation and Use
Page 19
T5
- 15 seconds autoscan delay time before switching to next port
T6
- 20 seconds autoscan delay time before switching to next port
T7
- 30 seconds autoscan delay time before switching to next port
T8
- 60 seconds autoscan delay time before switching to next port
U1
- CPU Switch Smart SUN-MAC-PC channels are switchable using a 3 button
mouse or IntelliMouse (default)
(CPU Switch Smart SUN-MAC-PC reports 2 button mouse mode to PCs)
U2
- CPU Switch Smart SUN-MAC-PC channels are not switchable using 3 button
mouse or IntelliMouse
(CPU Switch Smart SUN-MAC-PC reports 2 button mouse mode to PCs)
U3
- CPU Switch Smart SUN-MAC-PC channels are not switchable using 3
mouse or IntelliMouse
(CPU Switch Smart SUN-MAC-PC reports 3 button mouse mode to PCs)
U4
- CPU Switch Smart SUN-MAC-PC channels are switchable using 3 button
mouse or IntelliMouse
(CPU Switch Smart SUN-MAC-PC reports IntelliMouse mode to PCs)
U5
- CPU Switch Smart SUN-MAC-PC channels are not switchable using 3 button
mouse or IntelliMouse
(CPU Switch Smart SUN-MAC-PC reports IntelliMouse mode to PCs)
U7
– Cycle between all ports when switching with ‘H Tab’ or three button
mouse (default)
U8
– Cycle between active ports only when switching with ‘H Tab’ or three
button mouse
H1
- Hotkey combination is CTRL + ALT + command key (default)
H2
- Hotkey combination is CTRL + SHIFT + command key
H3
- Hotkey combination is ALT + SHIFT + command key
H4
- Hotkey combination is RIGHT ALT + command key
H5
- Hotkey combination is LEFT ALT + RIGHT ALT + command key
H6
- Hotkey combination is LEFT CTRL + LEFT ALT + command key
H7
- Hotkey combination is RIGHT CTRL + RIGHT ALT + command key
H8
- No hotkey combination enabled
F1
- Display firmware first digit
(Note: F1 is
F
F
followed by
1
1
NOT
l
l
)
F2
- Display firmware second digit
F3
- Display firmware third digit
F5
- Restore PS/2 mouse function
F6
- Restore IntelliMouse function
F8
- RESET all configurations to default settings. (Display confirms with 'r').