Lindsay Transportation Solutions Sales and Services, Inc
(888) 800-3691 [U.S. toll free] or +1 (707) 374-6800
Lindsay Transportation Solutions Sales and Services, Inc
(888) 800-3691 [U.S. toll free] or +1 (707) 374-6800
8
Step 1 – Assembling Components
• Components required:
• (1) Post 2 – BSI-1012086-00
• (1) Soil Plate – BSI-1312100-00
• (2) W-Beam – 4000443
• (1) Slider Panel (FRONT)– BSI-1012093-00
• (1) Slider Bracket – BSI-1012090-00
•
• Hardware Required:
• (2) 5/8” x 3 ½” Bolt - 2000220
• (8) 5/8” x 1 ¼” Guardrail Bolt - 4001115
• (4) 5/8” Washer - 2001636
• (8) 5/8” Guardrail Nut - 4001116
• (2) 5/8” Hex Nut - 2000312
Some components require assembly and it is
recommended that this step be completed prior to
the start of the system assembly.
Post II Assembly:
1. Attach the soil plate to the trailing / back side of
Post 2 using two (2) 5/8” x 3 ½” bolts, washers
(4), and nuts (2). The trailing / back end of the
post is identified by the open slots on the top of
the post.
The bolts should be installed from back to front
so that the head of the bolts rests on the soil
plate.
Depending on your post driver equipment,
Post 2 may need to be partially driven before
this step can be accomplished.
Notes:
Open Slots
Attach Soil Plate to Post II
Trailing / Back
INSTALLATION MANUAL
