background image

10    

16. SPARE PARTS

    When ordering spare parts, always provide the following:

•  product type

•  production year 

•  product's serial number

•  full name of the spare part and its number

Ordering Components

 

ALWAYS USE ORIGINAL COMPONENTS. The manufacturer or supplier bear no responsibility 

for non-original components or components not recommended by the manufacturer. 

17. INSPECTION BEFORE EVERY USE

1.  Visual check. 

2.  Lead-in cable check.

WARNING:

   

Do not use the device if defects or malfunctions are found.

18. PERIODIC CHECKS 

1x a week: check that the lead-in cable is 

undamaged and that the plug is firmly in the 

socket. 

 1x a week: check that the device is not ex-

posed to radiant heat. 

 1x a week: check that air circulation is not 

obstructed.

 1x a year: have an engineering inspector 

check the electrical safety of the device.

19. ENVIRONMENTAL PROTECTION

Waste Sorting

This product must not be disposed of in communal waste. Electrical waste in the Czech 

Republic is disposed of within the Rema System (www.remasystem.cz).

In countries other than the Czech Republic, waste sorting is subject to local regulations.

Sorting waste allows recycling and reusing used products and packaging materials. Reuse 

of recycled material helps protect the environment from pollution and reduces resource 

consumption. Local regulations may regulate the method of disposing of household ap-

pliances at local collection points or at the point of sale.

Содержание VK 15













Отзывы: