LINDR KONTAKT 300, Инструкция по эксплуатации

Страница: 19 / 24

cont
ac
t-cooled dispensing s
ys
tem
19
24. CLEANING THE CONDENSER:
The condenser must be cleaned with compressed air 1x a month.
figure
19 A
figure
19 b
25. SANITATION BY WATER:
(sanitation adapter)
Connect the sanitation adapter (not included) to water mains using a hose.
NOTE:
Sanitation adapter is not included.
Can be purchased as an accessory for the cooler.
figure
19 d
figure
19 c
WARNING! Maximum water temperature must not exceed 25 °C.
Sanitation procedure:
Once you have finished a keg, connect the keg coupler to the sanitation adapter the same way
as if you were tapping a keg. Once connected, turn the bar tap lever to open position and keep it
open until clean water flows out of the tap (all beverage residue and partial sediments flush out).