Lindinger C-185, Руководство пользователя

Страница: 4 / 8

C-185 Manual
5
C-185 Manual
5. Glue the rudder and elevator servos into place as pictures shown.
6.Glue the elevator into place the same way, again, carefully checking alignment
while drying. This is important if you want your plane to fly straight.
7.Glue the rudder into place as shown. and make sure to keep good alignment while drying.
9.Install the rudder and steering rods as shown:
8.Install the elevator control rod as shown.
10.Put the tail cover into position as shown:
11.Assemble the main landing gear into place using the provided screws as shown
6
4.Glue the fuselage and tail into place as pictures shown.
Modellbau Lindinger GmbH e-Mail: office@lindinger.at www.lindinger.at
Modellbau Lindinger GmbH e-Mail: office@lindinger.at www.lindinger.at