C-185 Manual
C-185 Manual
3
4
Technical Data:
Technical Data:
Standard version: Upgrade version
●
Wingspan: 1500MM
●
Wingspan: 1500MM
●
Length: 1138MM
●
Length: 1138MM
●
Take off weight: 1374g/1622g
●
Take off weight: 1622G
●
Wing area
：
35.1 sp.dm
●
Wing area
：
35.1 sp.dm
●
Wing laod: 39g sp.dm /46.2g sp.dm
●
Wing load: 46.2g sp.dm
●
Battery: 2200MAH 14.8V 15C
●
Battery: 2200MAH 14.8V 15C
●
ESC: 50A
●
ESC: 50A
●
Motor:3715 big out runner brushless motor Motor:3715 big out runner brushless motor
●
Propeller:1060 3blades
●
Propeller:1060 3blades
●
Max Thrust:1750G
●
Max Thrust: 1750G
●
Radio: 4 channels
●
Radio: 4 channels
Component:
Center Of Gravity:
Center Of Gravity:It is VERY important that the center of gravity be checked
before attempting flight. Move the battery around until the CG is correct.
Assembly:
Use of epoxy glue: Put equal amounts of part A and part B of the epoxy
glue onto a clean disposeable surface.Mix WELL and apply to the
parts...hold about five minutes until dry. Use only a THIN LAYER of
epoxy. Just enough to cover the mating surfaces. Any excess epoxy only
adds weight, not strength.
1.Apply epoxy to the aileron servos and glue into place as shown:
3.Install the aileron/flaps control rod.
2.(Optional) Epoxy the flap servos into place as shown.
Modellbau Lindinger GmbH e-Mail: [email protected] www.lindinger.at
Modellbau Lindinger GmbH e-Mail: [email protected] www.lindinger.at
