background image

 

 6 

 

Safety alerts, visual 
presentation, and layout 

While reading these instructions, you will encounter various 
symbols, illustrations, and text layouts intended to help you 
navigate and understand the instructions. Their meaning is 
explained below. 
 

Safety alerts: 

Activities that present specific hazards (to life and limb or 
possible damage to property) are indicated by safety alerts. 
Always be sure to follow the instructions given in the safety 
alerts. 
 

<  

 

 

 

DANGER

 

 

 

 

These safety alerts indicate an imminent danger. 
Ignoring them will result in death or serious injury

 

 

 

 

 

<  

 

 

 WARNING 

 

 

 

These safety alerts indicate potentially imminent 
danger. Ignoring them could result in death or 
serious injury 

 

 

 

 

 

 

<  

 

 

 CAUTION 

 

 

 

These safety alerts indicate potentially imminent 
danger. Ignoring them could result in minor injury

 

 

 

 

 

 

<  

 

 

 NOTICE 

 

 

 

These safety alerts indicate a potentially harmful 
situation. Ignoring them could result in damage to 
property or malfunctions

 

 

 

 

 

 

 

Illustrations: 

The illustrations used depict a specific product. For other 
products, they may have the function of a diagram only. This 
does not alter the basic workings and operation of the product. 

Text layout: 

 

First-order bulleted lists:

 Items on a bulleted list start with 

a solid black dot and an indent. 

 

Second-order bulleted lists:

 If there is a further listing of 

subitems, the second-order bulleted list is used. 

Legend:

 A legend explains the numbered contents of an 

illustration, presented as a numbered list. Items in a legend 
start with a number (with no dot) and an indent. 

 

Second-order legend:

 In some cases, the numbered 

contents of an image represent more than just one object. 
A second-order legend is then used. 

1.

 

Instruction steps:

 These indicate a chronological sequence 

of instruction steps. The numbers of the steps are in bold and 
are followed by a period. If a new activity follows, the 
numbering starts again at “

1.

” 

 

Second-order instruction steps:

 In some cases, it is 

necessary to divide up a step into a few substeps. A 
sequence of second-order instruction steps is then used. 

 

Содержание SKF CLP


















































Отзывы: