2 01 7 M K Z H Y B R I D
12
13
Tilting Head Restraints
You can adjust your front-row head restraints.
Pull up to raise the head restraint. To lower, press
the head restraint down while pressing and holding
the guide sleeve adjust and release button. Tilt the
head restraint forward for additional comfort by
gently pulling the top of the head restraint. After
the head restraint reaches the forward-most tilt
position, pivoting it forward again releases it to the
rearward, untilted position.
Note:
Do not attempt to force the head restraint backward after tilting it.
Multi-Contour Front Seats with Active Motion
*
Using the button mounted on the outside of
the front seats or through the touchscreen
menu, you and a front seat passenger
can adjust the massage and support
settings. You can also control the intensity
of the massage, increase or decrease
the lumbar bolster and cushion support,
and adjust the height of the bolster.
Climate Controlled
*
Front Seats
To use, press the heated seat symbol
or the cooled seat symbol
to cycle through the various settings
and off. More lights indicate warmer or
cooler settings.
The cooled seats only function when
the engine is running.
Heated Steering Wheel
*
Press the button on the climate
control panel to switch this feature on
and off.
Rear Heated Seats
*
The rear heated seat controls are on
the rear of the center console. To use,
press the heated seat button
to
cycle through the various heat settings
and off. More lights indicate warmer
settings. The rear heated seats only
function when the ignition is on.
Memory Function
Use the memory buttons on the
driver door to program and recall the
positions of the driver seat, power
mirrors and power tilt and telescopic
steering column*.
To program position
1
, press and hold
the
SET
button until you hear a single
tone, then press and hold the
1
button
until you hear another single tone. Use
this same procedure to set position
2
.
You can recall the set memory positions
by pressing the pre-set button.
You can also program your memory
seats to your intelligent access key.
That way, when you unlock your door
with the intelligent access key, your
memory features automatically move
into your saved position. See the
Seats
chapter in your
Owner’s Manual
for more details.
Comfort
Retractable Sunshade and Moonoof
*
The moonroof controls are on the overhead console and have a one-touch
open and close feature.
To open the moonroof, press and release
. The moonroof stops short of
the fully opened position. To open the moonroof fully, press and release the
control again. To close the moonroof, press and release
.
To vent the moonroof, press and release
.
The sunshade automatically opens with the moonroof. You can also open the
sunshade with the moonroof closed. To open the sunshade, press and release
. The sunshade stops short of its fully opened position for the comfort of rear
passengers. To open the sunshade fully, press the control again.
To close the sunshade, press and release
. The sunshade stops short of
its fully closed position. To close the sunshade fully, press the control again.
Ambient Lighting
*
When you switch this feature on, you light key areas of your vehicle interior
with a choice of colors.
To access and make adjustments:
1. Press the
Settings
icon >
Vehicle
>
Ambient Lighting
.
2. Tap the desired color to activate.
3. Drag the scroll bar up or down to increase or decrease the intensity.
To switch ambient lighting off, tap the active color once or drag the scroll bar for
the active color all the way down to zero intensity.
Welcome Lighting
The Lincoln welcome mat projection lights are on the bottom of the exterior
mirror housings. They project an image onto the ground a short distance from
your vehicle when welcome lighting or lighted entry turns on.
Dual Automatic Temperature Control
You and your front passenger can press independent controls to adjust the air
temperature on each side of the vehicle. To return to one temperature, hold
down the
AUTO
button for more than two seconds. The passenger setting then
switches to the driver's set temperature.
*if equipped
*if equipped
