Lincoln LFC 3000 Скачать руководство пользователя страница 2

Page Number - 2

LFC 3000 User’s Manual

Series “A”

Form 403082

IMPORTANT SAFETY INSTRUCTIONS.

1. Before installing or using this product, please read the

instruction  manual  thoroughly.

2. Unpacking: Please check that the product is complete

and free from any damage

3. Only qualified individual should install and/or repair this

product.

4. Unplug the LFC3000 from the electrical outlet before you

clean it.

Use a damp cloth for cleaning and do not use liquid or

aerosol  cleaners.

5.

Do not place the LFC3000 on an unstable surface that

may allow the unit to fall.

6. Never place the LFC3000 near or over a radiator or heat

register.

7.

Use the type of power source indicated on the label (AC

power). If you are not sure of the type of power available,

consult your supplier or local electric company.

8. The LFC3000 must be equipped with a plug having a

third (grounding) pin, which fits only into a grounding-

type outlet. This is a safety feature. LFC3000 should not

be used without a properly grounded outlet. Failure to

properly ground the LFC3000 may cause damage to the

unit or the data stored.

9. Do not put the LFC3000 where the cord will be walked

on.

10. An extension cord is not recommended for use with the

LFC3000.

If you use an extension cord, make sure that the total of

the ampere ratings on the products plugged into the

extension cord does not exceed the extension cord’s

ampere rating. Also make sure that the total of all

products plugged into the wall outlet does not exceed

15  amperes.

11. Unplug the LFC3000 from the wall outlet and have it

repaired by a qualified service person under the

following  conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into it.

C. If it has been exposed to rain or water.

D. If it does not operate normally when the operating

instructions are followed. Adjust only those controls that

are covered by the operating instructions since improper

adjustment of other controls may result in damage and

lose of data.

E. If it has been dropped or damaged.

If it exhibits a distinct change in performance, indicating

a need for service.

Table  of  Contents

Safety Instructions..........................................................................2

Description......................................................................................3

Memory Protected..........................................................................3

Technical Data................................................................................4

User Menu.......................................................................................4

Supervisor Menu............................................................................4

Customer Menu..............................................................................6

System Menu..................................................................................8

Transaction Codes......................................................................11

Flow Chart for Screens................................................................12

Failure to adhere to these safety instructions may result

in serious bodily injury or death.

Содержание LFC 3000













Отзывы: