Page Number - 10
LFC 3000 Users Manual
Series A
Form 403082
System Menu
Set Ticket B Adr.
To fulfill all the needs of the garage supervisor, LFC 3000
offers also the flexibility to print a copy of the transaction
tickets. All the printers must be connected through the serial
port and be Epson emulated. This printer can be the main
printer. This instruction must be done on EACH keypad. The
factory default setting is ticket B address on keypad 0.
Ticket B Address
I/O Control Unit
ENTER: The ticket B printer is connected on the I/O unit
(ID=0)
Use Up / down keys to select.
Ticket B Address
None
ENTER: There is no ticket B printer on the system.
Use Up / Down keys to select
Ticket B Address
Keypad x
ENTER: The ticket B printer is connected on the keypad
Number x.
Use Up / Down keys to select the address
ENTER
System Menu
Set System PIN
The system PIN code can be modified. Only numerical PIN
is accepted by the system. If the system PIN Number has
been forgotten, it will be necessary to reset the system and
re-configure. See Instruction Manual, under Troubleshoot-
ing, Lost Supervisor PIN.
ENTER
System Cfg PIN
****
LFC 3000 operates all the hose reels simultaneously or one
hose reel at a time. When the system is configured in
simultaneous mode, you will be able to dispense on all the
different hoses at the same time.
The factory default setting is simultaneous.
System Menu
Set Simultaneous Mode
ENTER
Set Simultaneous Mode
Non-Simultaneous
Use Up / down keys to select.
Set Simultaneous Mode
Simultaneous
In a multi I/O system without PC, this parameter must
programmed and must be the same on each I/O
ENTER
System Menu
Pulses per Liter
LFC 3000 is designed to register pulses from 1 to 255 per
liter. Refer to the type of pulse transmitter. To change to
pulses per quart see user menu, Set Language, change
to American English.
Pulse per Liter
100
In a multi I/O system without PC, this parameter must
programmed and be the same and on each I/O.
ENTER
System Menu
Max. Dispense
ENTER
Select Hose
0
Max. Dispense
_ 100
ENTER the maximum quantity that will be allowed to be
dispensing on the selected hose.
Then press ENTER and do the same for the other hoses.
System Menu
Decimal Place
Decimal Place
1
You can choose the place of the decimal. You only have 1 or
2 (use the Up / down arrow key).
( You also have to change physically the jumper located in
the display). ENTER
