Keys and Intelligent Access Messages
Action
Message
Displas if the sytem does not detect the intelligent access key in the following three scenarios:
When you press the start/stop button in an attempt to either start the engine or cycle through
the ignition states. When the engine is running and a door is opened then closed. When the
vehicle’s speed exceeds 10 mph (16 km/h) for the first time after starting.
No Key Detected
Displays during spare key programming, when an intelligent access key is programmed to the
system.
Key Programmed x Keys Total
Displays during spare key programming when the maximum number of keys have been
programmed.
Max Number of Keys Programmed
Displays when you press the start/stop button without applying the brake pedal. This is a reminder
that you must apply the brake pedal when pressing the start/stop button in order to start the
engine.
Press Brake to Start
Displays when you press the start/stop button to shut off the engine and an Intelligent Access
Key is not detected inside the vehicle.
Restart Now or Key is Needed
Displays when the vehicle is in the accessory ignition state.
Accessory Power Active
This message displays when there is a problem with your vehicle’s starting system. Contact an
authorized dealer for service.
Starting System Fault
117
Navigator (TB5) Canada/United States of America, enUSA, First Printing
Information Displays