6. Wipe the dipstick clean. Insert the dipstick
fully, then remove it again.
•
If the oil level is between the lower
and upper holes, the oil level is
acceptable. DO NOT ADD OIL.
•
If the oil level is below the lower hole,
add enough oil to raise the level within
the lower and upper holes.
•
Oil levels above the upper hole may
cause engine damage. Some oil must
be removed from the engine by an
authorized dealer.
7.
Put the oil level dipstick back into the oil
dipstick tube and ensure it is fully seated.
Adding Engine Oil
Note:
Do not remove the filler cap when the
engine is running.
Note:
Do not remove the engine oil level
dipstick when the engine is running.
Note:
Do not add oil further than the MAX
mark. Oil levels above the MAX mark may
cause engine damage.
E142732
Only use oils certified for gasoline engines by
the American Petroleum Institute (API). An
oil with this trademark symbol conforms to
the current engine and emission system
protection standards and fuel economy
requirements of the International Lubricants
Specification Advisory Council (ILSAC),
comprised of U.S. and Japanese automobile
manufacturers.
1.
Check the engine oil level.
2. If the engine oil level is not within the
normal range, add engine oil that meets
Ford specifications. See
Capacities and
Specifications
(page 290).
3. Remove the engine oil filler cap and use
a funnel to pour the engine oil into the
opening.
4. Recheck the engine oil level. Make sure
the oil level is not above the normal
operating range on the engine oil level
dipstick.
5. Install the engine oil level dipstick and
ensure it is fully seated.
6. Fully install the engine oil filler cap by
turning the filler cap clockwise until three
clicks are heard or until the cap is fully
seated.
OIL CHANGE INDICATOR RESET
To reset the oil monitoring system after an
oil change, See
General Information
(page
88).
ENGINE COOLANT CHECK
WARNINGS
Do not add engine coolant when the
engine is hot. Steam and scalding
liquids released from a hot cooling
system can burn you badly. Also, spilling
coolant on hot engine parts can burn you.
240
MKS (), enUSA
Maintenance
Содержание 2015 MKS
