The running boards automatically
move when the doors are opened to
assist entering and exiting the
vehicle.
Automatic Power Deploy
The running boards will extend down and out when the doors are opened.
Automatic Power Stow
The running boards will return to the stowed position after a two second
delay when the doors are closed.
Manual Power Deploy
To manually operate the running boards, refer to the
Information
Displays
chapter.
•
This feature can manually set the running boards in the deployed
(OUT) position for access to the roof.
•
When running boards are manually set in the deployed position, they
will return to the stowed position and enter automatic mode when the
vehicle speed exceeds 5 mph (8 km/h).
Enable and Disable
To enable and disable the power running board feature, refer to the
Information Displays
chapter.
•
When this feature is disabled (OFF), the running boards will move to
the stowed position regardless of the position of the doors.
•
When this feature is enabled (AUTO), the running boards will move
back to the correct positions based off of the door positions.
Bounce-Back
If an object is in the way of the moving running board, it will reverse
direction and move to the end of travel.
238
Load Carrying
2013 Navigator
(nav)
Owners Guide gf, 1st Printing
USA
(fus)