Lincoln 2009 MKZ Скачать руководство пользователя страница 16

Страница: 16 / 293

information on this system, refer to

Tire pressure monitoring system

(TPMS)

in the

Tires, Wheels and Loading

chapter.

Speed control:

Illuminates when

the speed control is engaged. Turns
off when the speed control system
is disengaged.

O/D off:

Illuminates when the

overdrive function of the
transmission has been turned off;
refer to the

Driving

chapter. If the

light does not illuminate, have the transmission serviced soon, or damage
may occur.

Anti-theft system:

Flashes when

the SecuriLock™ Passive Anti-theft
System has been activated.

Throttle Control/Transmission:

Illuminates when a powertrain or a
AWD fault has been detected.
Contact your authorized dealer as
soon as possible.

Door ajar (if equipped):

Illuminates when the ignition is in
the RUN position and any door or
decklid is open.

Turn signal:

Illuminates when the

left or right turn signal or the
hazard lights are turned on. If the
indicators flash faster, check for a burned out bulb.

High beams:

Illuminates when the

high beam headlamps are turned on.

Key-in-ignition warning chime:

Sounds when the key is left in the

ignition in the off or accessory position and the driver’s door is opened.

Headlamps on warning chime:

Sounds when the headlamps or parking

lamps are on, the ignition is off (the key is not in the ignition) and the
driver’s door is opened.

O/D

OFF

2009 MKZ

(378)

Owners Guide, 2nd Printing
USA

(fus)

Instrument Cluster

Содержание 2009 MKZ






































































































































































































































































































Результаты поиска

Содержание 2009 MKZ

Отзывы:

Похожие инструкции для 2009 MKZ

Бренды по названию

Популярные бренды

Lincoln 2009 MKZ, Руководство пользователя

Результаты поиска

Содержание 2009 MKZ

Отзывы:

Похожие инструкции для 2009 MKZ

Бренды по названию

Популярные бренды