Lincoln 2007 Mark LT Скачать руководство пользователя страница 265

Страница: 265 / 305

•

If the oil level is

within this

range,

the oil level is acceptable.

DO NOT ADD OIL.

•

If the oil level is

below this

mark,

engine

oil must be added

to raise the level within the
normal operating range.

•

If required, add engine oil to the
engine. Refer to

Adding engine

oil

in this chapter.

•

Do not overfill the engine
with oil. Oil levels above this
mark may cause engine
damage.

If the engine is

overfilled, some oil must be
removed from the engine by an
authorized dealer.

7. Put the indicator back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to

Checking the engine

oil

in this chapter.

2. If the engine oil level is not within the normal range, add only certified
engine oil of the recommended viscosity. Remove the engine oil filler cap
and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the
normal operating range on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

2007 Mark LT

(mlt)

Owners Guide (post-2002-fmt)
USA

(fus)

Maintenance and Specifications

264

Содержание 2007 Mark LT


















































































































































































































































































































Результаты поиска

Содержание 2007 Mark LT

Отзывы:

Похожие инструкции для 2007 Mark LT

Бренды по названию

Популярные бренды

Lincoln 2007 Mark LT, Руководство пользователя

Результаты поиска

Содержание 2007 Mark LT

Отзывы:

Похожие инструкции для 2007 Mark LT

Бренды по названию

Популярные бренды