Lincoln 2007 Mark LT Скачать руководство пользователя страница 109

Страница: 109 / 305

KEYS

The key operates all locks on your vehicle. In case of loss, replacement
keys are available from your dealer.

You should always carry a second key with you in a safe place in case
you require it in an emergency.

Refer to the

SecuriLock

娂

passive anti-theft system

section in this

chapter for more information.

POWER DOOR LOCKS

The power door lock controls are located on the driver and front
passenger door panels.

Press control to unlock all vehicle doors.

Press control to lock all vehicle
doors.

Smart unlocking feature

The smart unlocking feature helps
prevent you from locking yourself
out of your vehicle.

With the key in any ignition
position:

•

The driver’s door will
automatically unlock if it is locked
by the driver’s power lock control
while the driver’s door is open.

The vehicle may still be locked with
the key in the ignition, and performing one of the following actions:

•

Pressing the manual lock button on the door.

•

Operating the remote entry transmitter.

•

Operating the keyless entry keypad.

•

Operating the driver’s door with a key.

Autolock

The autolock feature will lock all the doors when:

•

all the doors are closed,

•

the ignition is in the 3 (ON) position,

2007 Mark LT

(mlt)

Owners Guide (post-2002-fmt)
USA

(fus)

Locks and Security

108

Содержание 2007 Mark LT


















































































































































































































































































































Результаты поиска

Содержание 2007 Mark LT

Отзывы:

Похожие инструкции для 2007 Mark LT

Бренды по названию

Популярные бренды

Lincoln 2007 Mark LT, Руководство пользователя

Результаты поиска

Содержание 2007 Mark LT

Отзывы:

Похожие инструкции для 2007 Mark LT

Бренды по названию

Популярные бренды