JACK LOCATION-REAR
The jack location markings can be
found
on the lower outer edge of
the body.
•
Locate the jack locator mark (B -
triangle
) on the body (C) near
the tire you are changing, then
place the jack (D)
under the
frame (A) of the vehicle
aligning it with the mark (B -
triangle
).
•
Position the jack according to the
following guides and turn the jack
handle clockwise until the wheel
is completely off the ground.
To lessen risk of personal
injury, do not put any part
of your body under the vehicle
while changing a tire. Do not start
the engine when your vehicle is
on the jack. The jack is ONLY
meant for changing the tire.
•
Never use the rear differential
as a jacking point.
7. Remove the lug nuts with the lug wrench.
8. Replace the flat tire with the spare tire, making sure the valve stem is
facing outward. Reinstall lug nuts until the wheel is snug against the hub.
Do not fully tighten the lug nuts until the wheel has been lowered.
9. Lower the vehicle by turning the jack handle counterclockwise.
B
C
D
A
2005 Town Car
(tow)
Owners Guide (post-2002-fmt)
USA_English
(fus)
Tires, Wheels and Loading
214