door to stop and reverse, does not meet current U.S. federal safety
standards. For more information, contact HomeLink
威
at:
www.homelink.com
or
1–800–355–3515.
Retain the original
transmitter for use in other vehicles as well as for future programming
procedures (i.e. new HomeLink
威
equipped vehicle purchase). It is also
suggested that upon the sale of the vehicle, the programmed HomeLink
威
buttons be erased for security purposes, refer to
Programming
in this
section.
Programming
Do not program the HomeLink
威
with the vehicle parked in the
garage.
Note:
Some vehicles may require the ignition switch to be turned to the
second (or “ACC”) position for programming and/or operation of the
HomeLink
威
. It is also recommended that a new battery be placed in the
hand-held transmitter of the device being programmed to HomeLink
威
for
quicker training and accurate transmission of the radio-frequency signal.
1. Press and hold the two outside
buttons. The message CLEARING
CHANNELS will appear on the
HomeLink
威
display.
•
After about 20 seconds, the
message CHANNELS CLEARED
will appear.
Do not
repeat step one to program additional hand-held transmitters to
the remaining two HomeLink
威
buttons. This will erase previously
programmed hand-held transmitter signals into HomeLink
威
.
2005 Town Car
(tow)
Owners Guide (post-2002-fmt)
USA_English
(fus)
Driver Controls
121