•
Tire Identification Number (TIN):
A number on the sidewall of
each tire providing information about the tire brand and
manufacturing plant, tire size and date of manufacturer.
•
Inflation pressure:
A measure of the amount of air in a tire.
•
Standard load:
A class of P-metric or Metric tires designed to carry a
maximum load at 35 psi [37 psi (2.5 bar) for Metric tires]. Increasing
the inflation pressure beyond this pressure will not increase the tires
load carrying capability.
•
Extra load:
A class of P-metric or Metric tires designed to carry a
heavier maximum load at 41 psi [43 psi (2.9 bar) for Metric tires].
Increasing the inflation pressure beyond this pressure will not increase
the tires load carrying capability.
•
kPa:
Kilopascal, a metric unit of air pressure.
•
PSI:
Pounds per square inch, a standard unit of air pressure.
•
B-pillar:
The structural member at the side of the vehicle behind the
front door.
•
Bead area of the tire:
Area of the tire next to the rim.
•
Sidewall of the tire:
Area between the bead area and the tread.
•
Tread area of the tire:
Area of the perimeter of the tire that
contacts the road when mounted on the vehicle.
•
Rim:
The metal support (wheel) for a tire or a tire and tube assembly
upon which the tire beads are seated.
Tire pressure monitoring system (TPMS)
When the tire pressure monitoring
system warning light is lit, one or
more of your tires is significantly
under-inflated. You should stop and
check your tires as soon as possible,
and inflate them to the proper pressure as indicated on the vehicle’s tire
information placard (label). Driving on a significantly under-inflated tire
causes the tire to overheat and can lead to tire failure. Under-inflation
also reduces fuel efficiency and tire tread life, and may affect the
vehicle’s handling and stopping ability. Even if your vehicle is equipped
with a tire pressure monitoring system, it is still important that you
manually check the inflation pressure of your tires regularly. Each tire,
including the spare, should be checked monthly when cold and set to the
recommended inflation pressure as specified on the vehicle placard
(label) and in the owner’s manual.
2004 Aviator f/k/a Navigator LS
(231)
Owners Guide (post-2002-fmt)
USA English
(fus)
Maintenance and Specifications
317