The Safety Canopy
娂
is mounted to the roof side-rail sheet metal, behind
the headliner, above the first and second row seats. In certain lateral
collisions or rollover events, the Safety Canopy
娂
system will be
activated, regardless of which seats are occupied. The Safety Canopy
娂
is
designed to inflate between the side window area and occupants to
further enhance protection provided in side impact collisions and rollover
events.
The fact that the Safety Canopy
娂
system did not activate in a collision
does not mean that something is wrong with the system. Rather, it
means the forces were not of the type sufficient to cause activation. The
Safety Canopy
娂
is designed to inflate in certain side impact collisions or
rollover events, not in rear impact, frontal or near-frontal collisions,
unless the collision causes sufficient lateral deceleration or rollover
likelihood.
Several Safety Canopy
娂
system components get hot after
inflation. Do not touch them after inflation.
If the Safety Canopy
娂
system has deployed,
the
Safety Canopy
娂
will not
function again. The Safety
Canopy
娂
system (including the
A, B and C pillar trim) must be
inspected and serviced by a
qualified technician in
accordance with the vehicle
service manual.
If the Safety
Canopy
娂
is not replaced, the
unrepaired area will increase the
risk of injury in a collision.
Determining if the system is operational
The SRS uses a readiness light in the instrument cluster or a tone to
indicate the condition of the system. Refer to the
Air bag readiness
section in the
Instrument Cluster
chapter. Routine maintenance of the
air bag is not required.
2004 Aviator f/k/a Navigator LS
(231)
Owners Guide (post-2002-fmt)
USA English
(fus)
Seating and Safety Restraints
192