To replace the battery:
1. Twist a thin coin between the two
halves of the transmitter near the
key ring. DO NOT TAKE THE
FRONT PART OF THE
TRANSMITTER APART.
2. Place the positive (+) side of new
battery in the same orientation.
Refer to the diagram inside the
transmitter unit.
3. Snap the two halves back
together.
Replacement of the battery will
not
cause the remote transmitter to
become deprogrammed from your vehicle. The remote transmitter should
operate normally after battery replacement.
Replacing lost transmitters
If a remote transmitter has been lost
and you would like to remove it
from the vehicle’s memory or you
would like to purchase additional
transmitters for your vehicle (up to
four may be programmed into
memory), take
all
your vehicle’s
transmitters to your dealer for
programming. It will be necessary
for your dealer to reprogram
all
the
remote transmitters to your vehicle
while performing this service.
Autolock/Relock (if equipped)
This feature automatically locks all vehicle doors when:
•
all doors are closed
•
the engine is running
•
you shift into any gear putting the vehicle in motion.
Controls and features
97
