Lincoln 2001 LS Скачать руководство пользователя страница 68

Страница: 68 / 272

3. Insert each CD tray, with the disc
loaded, all the way into the CD
magazine.

4. Insert the CD magazine into the
changer.

Use only compact discs containing
this mark.

Ensure that the disc is inserted label side up.

The magazine does not need to be full for the changer to operate.

Radio power must be turned on to play the CDs in the changer. The
magazine may be stored in the glove compartment when not being used.

The CD magazine may be inserted or ejected with the radio power off.

If coins or foreign objects get inside your system, they will damage the
CD player and void your audio system warranty.

Do not insert any damaged, or visibly contaminated discs into the
magazine as CD operation will be effected.

Do not insert any promotional (odd shaped or sized) discs, or
discs with removable labels into the CD player as jamming may
occur.

Troubleshooting the CD changer (if equipped)

The laser beam used in the compact disc player is harmful to the
eyes. Do not attempt to disassemble the case.

Controls and features

Содержание 2001 LS

















































































































































































































































































Результаты поиска

Содержание 2001 LS

Отзывы:

Похожие инструкции для 2001 LS

Бренды по названию

Популярные бренды

Lincoln 2001 LS, Руководство пользователя

Результаты поиска

Содержание 2001 LS

Отзывы:

Похожие инструкции для 2001 LS

Бренды по названию

Популярные бренды