DTF – 1960 Series Operator Manual
8
PROGRAMMING & OPERATION INSTRUCTIONS (CONT’D)
PROGRAMMING MODE
1. To enter the
PROGRAM MODE
, press and hold the
UP BUTTON
for 5 seconds. Each button has a light that
indicates when it can be used. When no buttons are pressed for 10-seconds, the unit will exit the program and
retain the last entry.
2. Use
the
UP and DOWN BUTTONS
to view or change:
a.
TEMPERATURE SETPOINT = TEMPERATURE BUTTON (#1)
b.
TOP IR ON/OFF = (#2) BUTTON
c.
COOK TIME VALUE = (#3) BUTTON
d.
BOTTOM I/R’s ON/OFF STATUS = (#4) BUTTON
The
TOP I/R
icon follows the 8 available selections.
The
BOTTOM I/R
icon follows the 8 available selections:
3. Set
TEMPERATURE UNITS (°C or °F)
.
a. Press and hold
BUTTON #1
for 20 seconds to change the
°C or °F
value.
b. To change again, repeat step a.
4. Set
TEMPERATURE DISPLAY
between
REAL
and
SETPOINT
.
a. Press and hold
BUTTON #4
for 20 seconds.
b. To change again, repeat step a.
5. Set
LANGUAGE SELECTION
.
a. Press and hold
BUTTON #2
for 20 seconds. Use
UP
and
DOWN BUTTONS
to select language.
PROGRAM MODE
No Bottom IR on
Heater #1 only
Heater #2 only
Heater #3 only
Heaters #1 & #2
Heaters #1 & #3
Heaters #2 & #3
All Bottom IR
Heaters On
(Factory Default)
No Top IR Heater on
Heater #1 only
Heater #2 only
Heater #3 only
Heaters #1 & #2 only
Heaters #1 & #3 only
Heaters #2 & #3 only
All Top IR
Heaters On
(Factory Default)
