Lincoln Electric REDI-MIG 210c, Руководство оператора

Страница: 8 / 12

Page 8 REDI-MIG
®
210c, 250c, 250s, 325c, 325s IM6015
Machine Installation
1.1 Location
Place the welder where clean cooling air can freely
circulate in through the back louvers and out through the
front louvres. Dirt, dust or any foreign material that can be
drawn into the welder should be kept at a minimum. Failure
to observe these precautions can result in excessive
operating temperatures and nuisance thermostat trips.
1.2 Connection to Mains Supply
Before connecting the machine to the mains supply check
that the voltage and current capacity correspond to the
machine voltage and rated input current. Use a fuse or C/B
per AS3000 or local wiring rules.
The machine is supplied with an input lead fitted.
Have a qualified electrician fit a suitable input plug.
The REDI-MIG ® 210c, 250c & 250s are supplied with
factory fitted 240 volt 15 amp plug. The REDI- MIG® 250c
& 250s are limited to 205 Amp at 20% Duty Cycle with
this lead fitted. To obtain full output as per the nameplate
ratings they require Input Lead part Number K32017 to be
fitted.
• Turn the input power o f f a t t h e
disconnect switch before installing
or servicing this machine.
• Do not touch e l e c t r i c a l l y “hot”
parts such as output terminals
or internal wiring.
• Connect earthing screw ( ) to a
good earth ground.
• Do not operate with c o v e r s re -
moved.
• Turn power switch “off” before
connecting or disconnecting
c a b l e s o r o t h e r e q u i p m e n t .
WARNING
HIGH
VOLTAGE
can kill
Only qualified personnel should install or service this equipment.
PRODUCT DESCRIPTION
The REDI-MIG ® family is the latest development in step controlled MIG welding machines designed and built by Lincoln Electric Australia.
Incorporating the proven Diamond Core Technology
TM
as used in other Lincoln Electric machines such as the Vantage
®
range of engine
drives, Invertec ® V350pro, and Power Wave ® power sources, these machines deliver a wider voltage “sweet spot” giving the operator a
larger operating envelop. This makes tuning in the right welding parameters a breeze, even for less skilled operators.
Lincoln Electric’s new REDI-MIG ® family comprises of five models in both compact and separate wire feeder. The REDI-MIG ® 210c, 250c
and 250s are for 240 volt supply and the REDI-MIG ® 325c and 325s are for 415 volt supply. Excellent arc characteristics are provided for
gas shielded and self shielded welding within the respective machine’s current ranges.
Section 1 - INSTALLATION
Never connect the green/yellow conductor to any of the
active supply lines from the mains. This conductor is to
earth the machine as required by Electrical Regulations.
Once the above has been followed the machine can be
plugged into the mains outlet.
CAUTION
Specifications 210C 250C 250S 325C 325S 4S
Part No. K32048-1 K32049-1 K32049-2 K32050-1 K32050-2 K32051-1
Maximum Open
Circuit Voltage 35V 38V 38V 45V 45V
Output Current Range 25 to 220A 25A to 250A 25A to 250A 25A to 400A 25A to 400A
Duty Cycle 170A, 22V @ 30%
140A,21V@60%
120A,20V@100%
250A,26.5V@30%
180A,23V@60%
140A,21V@100%
250A,26.5V@30%
180A,23V@60%
140A,21V@100%
325A,30V@30%
240A,26V@60%
190A,23.5V@100%
325A,30V@30%
240A,26V@60%
190A,23.5V@100%
Rated Input AS60974.1 240V 1 phase
50/60Hz 15 amp
240V 1 phase
50/60Hz 25 amp
240V 1 phase
50/60Hz 25 amp
415V 3 phase
50/60Hz 13.5amp
415V 3 phase
50/60Hz 13.5 amp
42V AC
5 amp
Wire Speed Range 1-20 m/min 1-20 m/min 1-20 m/min 1-20 m/min 1-20 m/min 1-20 m/min
H x W x L (mm)
Over handle 880 x 355 x 810 880 x 355 x 810 880 x 355 x 810 880 x 355 x 810 880 x 355 x 810 510 x 260 x 440
Operating Temperature -20°C to 40°C -20°C to 40°C -20°C to 40°C -20°C to 40°C -20°C to 40°C -20°C to 40°C
IP Rating IP23 IP23 IP23 IP23 IP23 IP23
Weight
(complete with u/c) 82 kg 91 kg 90 kg* 104 kg 103 kg* 24 kg
* Weights listed for the 250s and 325s must have the weight of the 4s wire feeder added to get the weights of the total package.