Lincoln Electric POWERTEC i380C ADVANCED, Руководство оператора, Страница: 24 / 34

English 22 English
Figure 57.

Confirm the select – press the Right Button [36]. The
factory settings are restored.
Diagnostic Information
Available information:

Software Version

Hardware Version

Welding Software

Ethernet IP Address

Power Source Protocol

Event Logs

Fatal Logs.
Advanced setup
This menu enables access to the
configuration parameters of the device. To
set the configuration parameters:

Access to the Settings and Configuration Menu.

Use the Right Knob [36] to highlight the
“configuration menu” icon.
Figure 58.

Press the Right Knob [36]. The Configuration Menu
is shown on the display.

Use the Right Knob [36] to highlight the Parameter
Number which will be changed, for example P.1 -
allows change WFS units, factory default:
"Metric" = m/min.
Figure 59.

Press the Right Knob [36].

Use the Right Knob [36] to highlight the in/min
(English/Imperial).
Figure 60.

Confirm the select – press the Right Button [36].