Lincoln Electric POWER WAVE 300C Скачать руководство пользователя страница 23

Страница: 23 / 68

PRODUCT DESCRIPTION

The Power Wave

300C is a high performance multi-

process machine with GMAW, FCAW, SMAW, DC

TIG, and pulse capability. Additionally, the advanced

model has the following capabilities:

The Power Wave

300C will provide the following:

• Multi Input Voltage with no reconnect - 208-600V,

50-60 Hz input.

• Single and Three Phase Power.

• Environmentally Hardened - IP21S rated for

operating in difficult environments.

• Feeding Options – Standard Mig guns

• Ethernet connectivity – allows access to the Power

Wave utilities software tools.

RECOMMENDED PROCESSES AND

EQUIPMENT

RECOMMENDED PROCESSES

The Power Wave

300C is a high speed, multi-process

power source capable of regulating the current, voltage, or

power of the welding arc. With an output range of 5 to 350

amperes, it supports a number of standard processes

including synergic GMAW, GMAW-P, FCAW, FCAW-SS,

SMAW, GTAW and GTAW-P on various materials especial-

ly steel, aluminum and stainless steel.

The following capabilities are supported:

• Remote foot pedal (K870-2) or hand amptrol (K963-4) are

a 12-pin connection.

• Standard MIG gun trigger connection (4-pin).

• The unit will have the K1500-1 gun bushing for LECO

backend connections.

• Simple process to switch between different welding

processes.

• (12 Pin) Remote Connector

PROCESS LIMITATIONS

The software based weld tables of the Power Wave

300C

limit the process capability within the output range and the

safe limits of the machine. In general the processes will be

limited to .035-.045 solid steel and stainless wire, .045-1/16

cored wire, as well as .035, 3/64 and 1/16 Aluminum wire.

The following items will not be supported on the standard

model, but are supported by the advanced model in the

product portfolio:

• STT

• AC welding processes

The Power Wave

300C is not recommended for pipe

thawing.

---------------------------------------------------------------------

EQUIPMENT LIMITATIONS

• Maximum gun length is 25 ft (7.6m) for push-only

systems.

• Maximum spool size is 12 in (305 mm) diameter.

• Maximum spool weight is 44 lb (20 kg).

• Other gun bushings are required for welding guns

that do not have a Magnum (Tweco #2-#4 compati-

ble) back end.

WARNING

POWER WAVE 300C

OPERATION

B-2

• STT

• AC Welding Process

• High Frequency TIG

Содержание POWER WAVE 300C





































































Результаты поиска

Содержание POWER WAVE 300C

Отзывы:

Похожие инструкции для POWER WAVE 300C

Бренды по названию

Популярные бренды

Lincoln Electric POWER WAVE 300C, Руководство оператора

Результаты поиска

Содержание POWER WAVE 300C

Отзывы:

Похожие инструкции для POWER WAVE 300C

Бренды по названию

Популярные бренды